PDF Standards NACE RP0189-95
Standard Recommended Practice – On-Line Monitoring of Cooling Waters
standard by National Association of Corrosion Engineers, 01/01/1995
Standard Recommended Practice – On-Line Monitoring of Cooling Waters
standard by National Association of Corrosion Engineers, 01/01/1995
Standard Recommended Practice – Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars
standard by National Association of Corrosion Engineers, 04/01/1995
Miscellaneous lampholders – Part 2-3: Particular requirements – Lampholders for double-capped linear LED lamps CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 04/01/2023
Connectors for electrical and electronic equipment – Product requirements – Part 8-107: Power connectors – Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated
standard by International Electrotechnical Commission, 05/01/2023
Electricity metering equipment – General requirements, tests and test conditions, Part 11: Metering equipment (IEC 62052-11:2020, MOD)
standard by Standards Australia, 03/24/2023
Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
standard by American Association of State and Highway Transportation Officials, 2022
Performance Specification for Automotive RF Connector Systems (Stabilized: Jul 2023)
standard by SAE International, 07/10/2023
Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet Hydrogen Sulfide Environments
standard by National Association of Corrosion Engineers, 02/12/2004
Drill Stem Performance Properties, Seventeenth Edition
standard by American Petroleum Institute, 04/01/2023
Standard Recommended Practice – Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures
standard by National Association of Corrosion Engineers, 04/01/1990