Standard Practice – Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks
standard by National Association of Corrosion Engineers, 01/09/2014

Test Procedures for Organic-Based Conductive Coating Anodes for Use on Concrete Structures
standard by National Association of Corrosion Engineers, 06/24/2005

Standard Recommended Practice – Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds
standard by National Association of Corrosion Engineers, 06/01/1972

The Use of Coupons for Cathodic Protection Monitoring Applications
standard by National Association of Corrosion Engineers, 12/03/2004

Standard Recommended Practice – Application of a Coating System to Interior Surfaces of Covered Hopper Rail Cars in Plastic, Food and Chemical Service
standard by National Association of Corrosion Engineers, 04/01/1992

Standard Test Method – Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)
standard by National Association of Corrosion Engineers, 03/15/2001

Standard Test Method for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubes
standard by National Association of Corrosion Engineers, 01/01/2006

Standard Test Method – Testing of Embeddable Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete
standard by National Association of Corrosion Engineers, 10/15/2001

Standard Test Method – Holiday Detection of Internal Tubular Coatings of Less Than 250, um (10 mils) Dry Film Thickness
standard by National Association of Corrosion Engineers, 01/01/1984

Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts
standard by National Association of Corrosion Engineers, 08/19/2010