Industrial communication networks – Profiles – Part 5-12: Installation of fieldbuses – Installation profiles for CPF 12
standard by International Electrotechnical Commission, 08/30/2018

Superconductivity – Part 8: AC loss measurements – Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
standard by International Electrotechnical Commission, 06/24/2010

Low-frequency cables and wires with PVC insulation and PVC sheath – Part 1: General test and measuring methods
standard by International Electrotechnical Commission, 05/23/2007

Components for low-voltage surge protection – Part 352: Selection and application principles for telecommunications and signalling network surge isolation transformers (SITs)
standard by International Electrotechnical Commission, 01/10/2018

Digital audio interface – Part 1: General
standard by International Electrotechnical Commission, 09/19/2008

Information technology equipment – Safety – Part 1: General requirements CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 05/10/2012

Conference systems – Electrical and audio requirements
standard by International Electrotechnical Commission, 06/30/1988

Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2.54 mm (0.1 in)
standard by International Electrotechnical Commission, 11/30/1990

Tests for electric cables under fire conditions – Circuit integrity – Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
standard by International Electrotechnical Commission, 05/19/2009

Industrial communication networks – Profiles – Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2
standard by International Electrotechnical Commission, 07/22/2010